Product ID:AMBERLITE IR-120 PLUS (H) RESIN, 69454
MSDS Date:06/25/1991
FSC:6810
NIIN:01-014-1030
MSDS Number: BWFBJ

ROHM AND HAAS CO

INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19105
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 215-592-3000

Cage: 77902

ROHM AND HAAS CO

PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

SULFONATED DIVINYLBENZENE/STYRENE COPOLYMER, H ION FORM

CAS: 39389-20-3

Fraction By Weight: 40-50%

OSHA PEL N/K

ACGIH TLV: N/K

0C,32F.

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 50-60%

OSHA PEL N/K

ACGIH TLV: N/K

EQUIP IS VITAL IF THESE ION EXCHANGE RESINS ARE

RTECS: 9999999ZZ

SUCH AS NITRIC ACID TO PVNT RAPID BUILD-UP OF PRESS

RTECS: 9999999ZZ

OF THESE MATLS BEFORE PRECEDING. DO NOT PACK COLUMN

RTECS: 9999999ZZ

WETTED; THIS EXPANSION CAN CAUSE GLASS COLUMNS TO

RTECS: 9999999ZZ

3-5 (AQ SLURRY).

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: MATERIAL CAN CAUSE IRRITATION.
SKIN: PROLONGED OR REPEATED SKIN CONTACT CAN CAUSE SLIGHT SKIN
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: FLUSH WITH LARGE AMOUNT OF WATER FOR AT LEAST 15
MINUTES. CONSULT PHYSICIAN IF IRRITATION PERSISTS. SKIN: WASH
AFFECTED AREAS THOROUGHLY WITH SOAP AND WATER. INHALATION: REMOVE
FROM EXPOSURE. SUP PORT BREATHING (GIVE ARTIFICIAL
RESPIRATION/OXYGEN) . INGESTION: CALL MD IMMEDIATELY .

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTION GENERATES TOXIC FUMES OF
FOLLOWING: SULFUR OXIDES.

Spill Release Procedures:WEAR NATURAL RUBBER GLOVES. TRANSFER TO
SUITABLE CONTAINER FOR DISPOSAL. FLOOR MAY BE SLIPPERY USE CARE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MIN RECOM STORAGE TEMP FOR MATL IS
0C/32F. MAX RECOM STORAGE TEMP FOR MATL IS 60C/140F. AVOID RPTD
FREEZE-THAW CYCLES; BEADS MAY FRACTURE.
Other Precautions:MAX RECOM OPER TEMP FOR MATL IS 120C/250F. NOTE: PROD
AS SUPP IS WHOLE BEAD ION EXCHANGE RESIN & MAY PRDCE SLIGHT EYE
IRRIT. HOWEVER, GROUND FORM OF STRONG ACID CATION EXCHANGE RESIN
SHOULD BE TREATED AS SEV EYE IRRIT. WORKER EXPOS (SUPDAT)

Respiratory Protection:A RESP PROT PROGRAM MEETING OSHA 1910.134 AND
ANSI Z88.2 REQUIREMENTS MUST BE FOLLOWED WHENEVER WORKPLACE
CONDITIONS WARRANT RESPIRATOR'S USE. NONE REQD UNDER NORM OPER
CNDTNS. WEAR NIOSH/MSHA APPRVD RESP APPROP FOR EXPOS OF CONCERN .
Ventilation:VENT SYS EMPLOYED IS DEPENDENT ON USER'S SPECIFIC APPLIC OF
MATL. REFER TO CURRENT EDITION OF INDUSTRIAL VENT: A(SUPDAT)
Protective Gloves:CHEMICALLY RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES (ANSI Z87.1 0R APP EQUIV)
Other Protective Equipment:FACILITIES STORING OR UTILIZING MATERIAL
SHOULD BE EQUIPPED WITH AN EYEWASH FACILITY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VENT: MANUAL OF RECOM PRACT PUBLISHED BY ACGIH FOR INFO ON DESIGN,
INSTALLATION, USE, & MAINTENANCE OF EXHST SYS. OTHER PREC: TO
GROUND RESINS CAN BE CNTRLD W/LOC EXHST VENT AT POINT OF DUST GEN,
OR U SE OF SUITABLE PERS PROT EQUIP (NIOSH/MSHA APPRVD DUST-MIST
AIR-PURIFYING RESP & SAFETY GOGG). PROPERLY DESIGNED (ING 3)

Boiling Pt:B.P. Text:SEE ING 2
Melt/Freeze Pt:M.P/F.P Text:SEE ING 2
Vapor Pres:17@20C/68F
Vapor Density:<1
Spec Gravity:1.1-1.4(H*2O=1)
pH:ING 7
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BEADS
Percent Volatiles by Volume:ING 2

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, PARTICULARLY CONCENTRATED NITRIC ACID.
Stability Condition to Avoid:TEMPERATURES ABOVE 200C/392F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD
FOLLOWING: MONOMER VAPORS, SULFUR OXIDES.

Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED OR LANDFILLED IN
FACILITIES MEETING LOCAL, STATE, AND FEDERAL REGULATIONS. FOR
CONTAMINATED RESIN, USER MUST DETERMINE HAZARD AND USE AN
APPROPRIATE DISPOSAL METHOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.